1. Input Voltage DC5V, Single signal (data) control.
2. SK6822 IC embedded in SMD5050 RGB LED.
3. Signal breakpoint transmission, any fault pixel won‘t affect signal transmission ,
unless two consecutive adjacent LED are fault.
unless two consecutive adjacent LED are fault.
4. 60leds/m,33.3mm/1.31”intervals cutting point.
5. 10mm S shape PCB,each led is programmable.
6. White PCB/Black PCB available.
7. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System：SD controller , DMX controller , Artnet.
10. Only DI wired to controller‘ data.
| Product Model | ||||||||||
| M/N | Size/mm | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
| GES30RGB6822A | 5000*10*2.5 | IP21 | DC5V | SMD5050RGB | SK6822 Built-in |
30 | 30 | R:75lm G:150lm B:60lm Mix W:200lm |
120 | 9.0w |
ChatNow
Mail me