1. Input Voltage DC5V, Single signal (data) control.
2. SK6812/WS2812B IC embedded in SMD5050 RGB LED,each led is programmable.
3. 30leds/m,33.3mm/1.31" intervals cutting point
4. 5mm width mini PCB.
5. White PCB/Black PCB available.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
7. 3M adhensive tape stick on the back of non-waterproof version.
8. Controller System：SD controller , DMX controller , Artnet.
| Product Model | ||||||||||
| M/N | L*W*H(mm) | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
| GE30RGB6812A5mm | 2000*5*2.5 | IP21 | DC5V | SMD5050RGB low heat led | SK6812 Built-in |
30 | 30 | R:36lm G:75lm B:24lm Mix W:105lm |
120º | 4.0w |
| GE30RGB2812BA5mm | 2000*5*2.5 | IP21 | DC5V | SMD5050RGB low heat led | WS2812B Built-in |
30 | 30 | R:36m G:75lm B:24lm Mix W:105lm |
120º | 4.0w |
ChatNow
Mail me