1. Input Voltage DC12V, single signal (DI) control.
2. Signal breakpoint transmission, any fault pixel won‘t affect signal transmission ,unless two consecutive adjacent fault LED.
3. External GS8208 IC Control. warm white+Cold white+Amber three chips in SMD5050.
4. 20leds/m,48leds/m,60leds/m available.Each led is programmable.
5. 50mm/1.97",20.8mm/0.82",16.7mm/0.66" intervals cutting point
6. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
7. Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System：SD controller , DMX controller , Artnet.
10. Only DI wired to controller‘ data . BI is for the chip‘s breakpoint resume function when we resolder PCB
| Product Model | ||||||||||
| M/N | Size/mm | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
| GE20WWA8208A12 GE20WWA8208B12 GE20WWA8208C12 GE20WWA8208D12 |
5000*10*2.5 5000*10*3.0 5000*12*3.5 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050 WWA W+WW+Amber |
GS8208 External |
20 | 20 | W: 130lm WW:120lm A:60lm | 120 | 4.8w |
| GE48WWA8208A12 GE48WWA8208B12 GE48WWA8208C12 GE48WWA8208D12 |
5000*10*2.5 5000*10*3.0 5000*12*3.5 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050 WWA W+WW+Amber |
GS8208 External |
48 | 48 | W: 312lm WW:288lm A:144lm | 120 | 11.52w |
| GE60WWA8208A12 GE60WWA8208B12 GE60WWA8208C12 GE60WWA8208D12 |
5000*12*2.5 5000*12*3.0 5000*14*3.5 5000*14*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050 WWA W+WW+Amber |
GS8208 External |
60 | 60 | W: 390lm WW:360lm A:180lm | 120 | 14.4w |
ChatNow
Mail me