1. Input Voltage DC12V, single signal (DI) control. Adopt chips in series design, High light efficiency compare to old type.
2. Signal breakpoint transmission, any fault pixel won‘t affect signal transmission ,unless two consecutive adjacent fault LED.
3. GS8208 IC embedded in SMD5050 RGB LED. Each led is programmable.
4. 30leds/m,60leds/m,144leds/m available.
5. 33.3mm/1.31",16.6mm/0.65",6.9mm/0.27" intervals cutting point
6. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
7. Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System：SD controller , DMX controller , Artnet.
10. Only DI wired to controller‘ data . BI is for the chip‘s breakpoint resume function when we resolder PCB
| Product Model | ||||||||||
| M/N | L*W*H(mm) | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
| GE30RGB8208A GE30RGB8208B GE30RGB8208C GE30RGB8208D |
5000*10*3.0 5000*10*3.5 5000*12*4.0 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050RGB | GS8208 Built in |
30 | 30 | R: 75lm G:150lm B:60lm Mix W:240lm |
120 | 4.5w |
| GE60RGB8208A GE60RGB8208B GE60RGB8208C GE60RGB8208D |
5000*10*3.0 5000*10*3.5 5000*12*4.0 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050RGB | GS8208 Built in |
60 | 60 | R: 150lm G:300lm B:120lm Mix W:480lm |
120 | 9.0w |
| GE144RGB8208A GE144RGB8208B GE144RGB8208C GE144RGB8208D |
5000*12*2.5 5000*12*3.0 5000*14*3.5 5000*14*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050RGB | GS8208 Built in |
144 | 144 | R: 360lm G:720lm B:288lm Mix W:1150lm |
120 | 21.6w |
ChatNow
Mail me
