1. Input Voltage DC12V, single signal (DI) control. Adpot chips in series design, High light efficiency compare to old type.
2. Signal breakpoint transmission, any fault pixel won‘t affect signal transmission ,unless two consecutive adjacent fault LED.
3. GE8808 IC embedded in SMD5050 RGB LED. Each led is programmable.
4. 30leds/m,60leds/m,144leds/m available.
5. 33.3mm/1.31",16.6mm/0.65",6.9mm/0.27" intervals cutting point
6. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
7. Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System：SD controller , DMX controller , Artnet.
10. Only DI wired to controller‘ data . BI is for the chip‘s breakpoint resume function when we resolder PCB
| Product Model | ||||||||||
| M/N | Size/mm | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
| GE30RGB8808A GE30RGB8808B GE30RGB8808C GE30RGB8808D |
5000*10*3.0 5000*10*3.5 5000*12*4.0 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050RGB | GE8808 Built in |
30 | 30 | R: 80lm G:160lm B:65lm Mix W:255lm |
120 | 4.5w |
| GE60RGB8808A GE60RGB8808B GE60RGB8808C GE60RGB8808D |
5000*10*3.0 5000*10*3.5 5000*12*4.0 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050RGB | GE8808 Built in |
60 | 60 | R: 160lm G:320lm B:130lm Mix W:510lm |
120 | 9.0w |
| GE144RGB8808A GE144RGB8808B GE144RGB8808C GE144RGB8808D |
5000*12*2.5 5000*12*3.0 5000*14*3.5 5000*14*4.0 |
IP21 IP65 IP67 IP68 |
DC12V | SMD5050RGB | GE8808 Built in |
144 | 144 | R: 390lm G:790lm B:305lm Mix W:1210lm |
120 | 21.6w |
ChatNow
Mail me
